CHEMTICS — Front Entrance · Automatic Sliding Door
CHEMTICS CHEMICAL Co., Ltd. • Ain Sokhna • Ref: BC-QTN-2026-036 • Drawing SD-01 • Rev 2
A. 3D VIEW — front entrance (outside)
drag to rotate • scroll/pinch to zoom • double-tap to auto-spin
The Design
• Top 300 mm: glass fanlight running wall to wall, in 4 panes divided at the posts.
• Next 100 mm: a 100×100 black steel transom running wall to wall on both sides. It also hides the RECORD operator, and the sensor sits in the middle.
• Below: glass as normal, with fixed · sliding · sliding · fixed panels in slim black frames.
• Glass print at eye level: the full logo on each sliding door: a big CHEMTICS mark with 凯密迪, and below it a smaller mark beside CHEMTICS CHEMICAL CO., LTD. The name stays visible even when the doors are open. A frosted CHEMTICS band runs on the same line across the other glass.
• Each end: a frameless 10 mm glass door, 900 wide, opening inward, with patch fittings, a floor spring, a pull handle and a lock. Each has a 40×40 steel post on each side (4 posts in total).
Assembly Data
Glass & Steel Specification
Glass10 mm clear tempered
StandardEN 12150
PostsSHS 40×40×2
TransomRHS 100×100×3
Door frames50×44 slim
FinishMatte black RAL 9005
Side doorsFrameless 10 mm · patch fittings · floor spring · pull handle 1200 · lock — open inward
Ain Sokhna is a coastal, salty site. All steel is hot-dip galvanised and then powder-coated matte black, and the fixings are stainless steel.
B. FRONT ELEVATION — outside face
SCALE — NTS · mm
D. SECTION — through the centre
NTS
C. PLAN — at door level
SCALE — NTS · mm
Notes
• All sizes assume the opening of the existing front. They must be re-measured on site before glass is ordered.
• Glass sizes are net cut sizes that allow for frame bite and clearances.
• The sliding leaves run on the inside track and park behind the fixed panels when open.
• The 100×100 transom runs wall to wall and carries the operator. It is welded to the 40×40 posts and anchored into the walls at both ends.
• The two end doors are frameless 10 mm tempered glass doors with patch fittings on floor springs. They open inward and serve as manual / emergency exits.
• All steel is welded, ground, galvanised and finished in matte black powder coat.
E. Door print — full logo on EACH sliding leaf, at eye level, seen from outside (to scale)
SLIDING DOORS
F. DOOR SAFETY BAND — on all lower glass
A frosted band mm high at mm (centre line, eye level) on the fixed panels and both side doors, in line with the door print. It marks the glass for safety and repeats the brand.
Print Specification
MethodUV digital print / cut vinyl
Applied onInside face
Purple#3B3388
Orange#F2A33A
BackingWhite underlay
BandFrosted (sand-blast look)
Door text凯密迪 · CHEMTICS CHEMICAL CO., LTD.
The print goes on the inside face so it is protected from weather and cleaning. It is printed mirror-reversed, with a white underlay so the colours read clearly from outside, day and night.
The logo on this sheet was redrawn from the client's image. Production uses the client's original vector logo (AI / PDF / SVG), so the Chinese lettering matches their brand exactly.